Economical equivalents with quick delivery for replacement of water and wastewater treatment projects.    E-mail: [email protected]

Products

TFMAXP52 UF Membrane

Product No.:TFMAXP52

  • Details

General Information

TaFlux TaCap Max Pro series ultrafiltration (UF) membrane module TFMAXP52 is a pressurized module, which is designed and manufactured for the filtration of surface water, potable water, seawater and industrial wastewater. This UF module is made of new generation PVDF hollow fiber membrane with high fouling resistance and hydrophilicity.

TFMAXP52 UF module is applied in flexible UF systems, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes such as NF and RO.

Features

Outside-to-inside flow direction

New generation TIPS PVDF hollow fiber

Uniform pore size of 0.08 μm

Typical filtrate turbidity ≤ 0.1 NTU

Bacteria removal ≥ 4 log

Advantages

Extra high tensile strength for longer service life

High tolerance for feed water

High-quality filtrate

Less energy needed for high flux

Longer service life by high fouling resistance and mechanical strength

Economical equivalent module for direct replacement

Applications

Surface water

Potable water

Beverage clarification

Industrial process water

Reclaimed water reuse

Industrial wastewater

Pre-treatment of seawater desalination

Module Dimensions

TFMAXP52 Dimensions


Model

L

(mm/in)

L1

(mm/in)

L2

(mm/in)

D

(mm/in)

D1

(mm/in)

W

(mm/in)

Connection port

Air inlet

TFMAXP52

1364.9/53.74

1257.3/49.5

1135.5/44.7

250/9.84

290/11.42

172/6.8

DN50 (2Victaulic)

3/8” FNPT





Specifications

Model

TFMAXP52

Effective membrane area (m²/ft²)

52/560

Filtrate flow rate

m3/h (gpm)

1.7 - 6.2

(7.5 - 27.3)

Dry weight (KG/lbs)

41/90

Wet weight filled with water (KG/lbs)

73/161

Membrane material

PVDF (Polyvinylidene Fluoride), TIPS

Fiber ID/OD

0.6/1.2 mm (0.024/0.047 inch)

Flow direction

Outside-in

Pore size

0.08 μm

Housing material

UPVC

Potting material

Epoxy resin


Operating and Cleaning Limits

Type of operation

Dead-end flow or cross flow

Typical flux (25°C)

34 - 120 L/m2·h (20 - 71 gfd)

Temperature

1 - 40°C (34 - 104°F)

Maximum feed pressure (20°C)

5 bar (73 psi)

Maximum feed pressure (40°C)

3 bar (44 psi)

Maximum trans-membrane pressure

2 bar (30 psi)

Maximum air scour feed pressure

2.5 bar (36 psi)

Air scour flow

12.3 - 15.4 Nm3/h (7.3 - 9.1 acfm)

Air scour duration

2 - 4 minutes

Air scour frequency

Once every 20 - 60 minutes

pH-Continuous operation @25°C

2 - 11

pH-Cleaning @25°C

1 - 13

Maintenance cleaning frequency

1 - 3 times per day

Maintenance cleaning duration

20 - 30 minutes

Disinfection chemicals

NaClO, ClO2 or NH2Cl

Cleaning chemicals

NaOH, HCl, H2SO4 or citric acid

Instantaneous chlorine tolerance

5,000 ppm

Maximum chlorine exposure

750,000 ppm-hrs

Maximum feed TSS

100 ppm

Maximum feed turbidity

300 NTU

Maximum feed particle size

300 µm

Filtrate SDI15

≤ 2.5

Filtrate turbidity

≤ 0.1 NTU

Previous Product:TFMAXP78 UF Membrane

Post your feedback

The Code:

Wechat Code
Wechat