Tanal
General Information
TaFlux Liq series TFLQ6079 PES UF membrane module is manufactured as equivalent, replacement, alternative, analog, retrofit and analogue to 3M Liqui-Flux W10-08A and W10-08N.
TaFlux Liq series ultrafiltration(UF) membrane modules are pressurized modules, which are designed and manufactured for the filtration of surface water, potable water and process water etc. These UF modules are made of new generation PES hollow fiber membrane with high fouling resistance and hydrophilicity.
TaFlux Liq series UF modules are applied in new systems, as well as directly connected to existing UF systems as replacements, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes.
Equivalent, replacement, alternative, analog, retrofit and analogue: 3M Liqui-Flux W10-08A, W10-08N.
Features
- Inside-to-outside flow direction
- New generation PES hollow fiber
- Nominal pore size of 0.02 μm
- Typical filtrate quality SDI ≤ 2.5, turbidity ≤ 0.1 NTU
Advantages
- High tolerance for feed water
- High-quality filtrate
- Less energy needed by high flux
- Longer service life by high fouling resistance
- Direct and economical module replacement
Applications
- Surface water
- Potable water
- Industrial process water
- Pre-treatment of sea water desalination
Module Dimensions
|
Part number |
L (mm/inch) |
L1 (mm/inch) |
L2 (mm/inch) |
D (mm/inch) |
|
TFLQ6079 |
1,543/60.75 |
1,223/48.15 |
57/2.24 |
320/12.6 |
Specifications
|
Specifications |
Parameters |
|
Effective membrane area |
79 m² (850 ft²) |
|
Membrane material |
PES (Polyethersulfone) |
|
Fiber ID/OD |
0.8/1.2 mm (0.03/0.05 inch) |
|
Pore size |
0.02 μm |
|
Flow direction |
Inside-out |
|
Housing material |
PVC |
|
Clamp material |
Stainless steel |
|
Potting material |
Polyurethane resin |
|
End cap sealing |
EPDM |
|
Connection port |
Variable (refer to Ordering Guide) |
|
Dry weight |
51 KG (113 lbs) |
|
Wet weight filled with water |
133 KG (293 lbs) |
Operating and Cleaning Limits
|
Type of operation |
Dead-end flow or cross flow |
|
Design flux(25°C) |
50-150 L/m2·h (29-88 gfd) |
|
Working temperature @4 bar(58 psi) |
1-40°C (34-104°F) |
|
Maximum working pressure(20°C) |
6 bar (87 psi) |
|
Maximum trans-membrane pressure |
2.5 bar (36 psi) |
|
Typical trans-membrane pressure |
0.1-0.7 bar (1.5-10 psi) |
|
Backwash flux(25°C) |
225-300 L/m2·h (133-176 gfd) |
|
Typical backwash trans-membrane pressure |
0.5-2 bar (7-30 psi) |
|
pH-Continuous operation @25°C |
2-12 |
|
Cleaning chemicals |
NaOH, NaOCl, HCl |
|
pH-Cleaning @25°C |
1-13 |
|
Maximum instantaneous free chlorine concentration |
200 ppm |
|
Maximum free chlorine exposure |
200,000 ppm |
Ordering Guide
|
Module Type |
Nominal Length |
Membrane Area |
- |
Bottom Connection |
Top Connection |
Filtrate Connection |
Dimension of Bottom Connection |
Dimension of Top Connection |
Dimension of Filtrate Connection |
||||||||
|
TFLQ |
60 |
=60.75” |
79 |
=79 m² |
- |
A R |
=axial =radial |
A R |
=axial =radial |
B D S |
=bent =double =single |
3
6 |
=Victaulic 73 mm =Victaulic 76 mm |
3
6 |
=Victaulic 73 mm =Victaulic 76 mm |
3
6 |
=Victaulic 73 mm =Victaulic 76 mm |
