Tanal
General Information
TaFlow Line series polypropylene pleated high flow filter cartridge is specifically developed to provide higher flow solution for particulate removal in clarification and prefiltration of process, representing a highly-optimized pleated filter technology.Features
-
Micron retention ratings from 0.5 to 50 microns
-
Ergonomically designed handle.
- High surface area, high flow rates with low pressure drops
Benefits
-
Reduce capital expenditure by fewer cartridges and housings used.
-
Reduce operational expenditure by reduced cartridge change-out frequency, downtime, product waste, labour and disposal costs with longer service life.
-
Ideal choice for a wide variety of process applications.
-
Highly durable polypropylene construction, broad chemical compatibility, suitable for rigorous process conditions.
-
Safe, faster and easier filter change-out.
- Direct and economical filter cartridge replacement.
Applications
-
Food & Beverage
-
Pharmaceutical
-
Potable water
-
Process water
-
Cooling water for power generation
-
Reverse osmosis pre-filtration
-
Petrochemical and chemicals
-
Industrial condensate water
-
Wastewater reuse
- Municipal water, etc.
Specifications
Effective Filtration Area (EFA): ≥ 6 m2 (64.6 ft2) per 40" (1016 mm)
Materials of Construction
Filter media: microfiber polypropylene
Support/Drainage material: polypropylene
Hardware: polypropylene
End cap: Glass fiber reinforced polypropylene
Sealing: Thermal bond
O-ring: NBR (nitrile), EPDM (ethylene propylene), Silicone
Dimensions (nominal)
Outer diameter: 171.5 mm (6.75”)
Lengths: 1,016 mm (40"), 1,524 mm (60”)
Removal Rating: 0.5 μm, 1 μm, 5 μm, 10 μm, 20 μm, 50 μm
Purity: free of surfactants, resins, binders and adhesives.
TaFlow Line series filter cartridges are designed, developed and manufactured in accordance with a Quality Management System approved by an accredited registering body to an ISO 9001 Quality Systems Standard and are shipped with a Certificate of Quality.
All components of TaFlow Line series filter cartridges are Food and Drug Administration (FDA) listed for food contact use in the Code of Federal Regulations (CFR) Title 21 (177.1520 and 177.2600) and conform to the relevant requirements of Regulation (EC) 1935/2004 for their intended food contact applications and USP for the Biological Test for Plastics, Class VI.
For easy traceability and identification, every filter cartridge has a lot number.
Operating Conditions
Recommended change-out differential pressure: 2.4 bar (35 psi) @ 20°C (68°F)
Maximum differential pressure:
5.2 bar (75 psi ) @ 20°C (68°F)
3.4 bar (50 psi) @ 82°C (180°F) for pleated polypropylene
3.4 bar (50 psi) @ 121°C (250°F) for pleated glass fiber
Maximum reverse differential pressure: 2.8 bar (40 psi) @ 20°C (68°F)
Maximum operating temperature: 82°C (180°F)
Recommended maximum recommended water flow rate
40" cartridge up to 1,325 lpm (350 gpm), 60" cartridge up to 1,892 lpm (500 gpm).
Pressure drop on flow rate:
|
Removal rating (μm) |
Element pressure drop (mbar/m3/h) |
Element pressure drop (psi/gpm) |
||||
|
0.5 |
7.86 |
3.8 |
2.56 |
0.0258 |
0.0125 |
0.0084 |
|
1 |
6.08 |
2.94 |
1.98 |
0.02 |
0.0097 |
0.0065 |
|
5 |
1.48 |
0.73 |
0.49 |
0.0049 |
0.0024 |
0.0016 |
|
10 |
1.04 |
0.52 |
0.35 |
0.0034 |
0.0017 |
0.0011 |
|
20 |
0.74 |
0.36 |
0.24 |
0.0024 |
0.0012 |
0.0008 |
|
50 |
0.46 |
0.22 |
0.15 |
0.0015 |
0.0007 |
0.0005 |
Unit conversion: 1 mbar = 0.0145 psi
Ordering Guide
|
Cartridge |
Material |
Nominal Length |
Removal Rating |
O-ring Material |
||||||
|
FCTFL |
PP |
=Polypropylene |
40 |
=40" |
05 |
=0.5 μm |
10 |
=10 μm |
N |
=NBR |
|
|
|
60 |
=60" |
1 |
=1 μm |
20 |
=20 μm |
E |
=EPDM |
|
|
5 |
=5 μm |
50 |
=50 μm |
S |
=Silicone |
|||||
Example model: FCTFLPP605N refers to TaFlow Line series PP pleated high flow filter cartridge, 60", 5 μm, NBR O-rings.
