Tanal
General Information
TaFlux ULP series reverse osmosis membrane elements TFULP-8040HF are developed for energy saving for water treatment in various industries and applications, ideal for reverse osmosis plant managers and operators dealing with low to medium TDS level water with essential pre-treatment.
TaFlux ULP series reverse osmosis membrane element provides consistency, high-quality filtrate, reliable performance, and long service life at a low feed pressure, which saves energy and reduces operation costs.
TaFlux ULP series reverse osmosis membrane element provides consistency, high-quality filtrate, reliable performance, and long service life at a low feed pressure, which saves energy and reduces operation costs.
Features & Advantages
- High permeability
- Anti-fouling structure design
- Good consistency and reliability
- Economical equivalent element for direct replacement
Applications
- Municipal drinking water
- Industrial process water
- Dual water supply system
- Pure water preparation plant
Specifications
-
Configuration: Spiral wound element
-
Membrane Polymer: Polyamide thin-film composite
Performance
|
Element Model |
Membrane Active Area ft2 (m2) |
Feed Spacer mil (mm) |
Permeate Flow Rate* GPD (m3/d) |
Stabilized Salt Rejection** |
Minimum Salt Rejection |
|
TFULP-8040HF |
400 (37.2) |
28 (0.712) |
12,000 (45.4) |
99.2% |
99.0% |
Standard test conditions:
The above performance is initial (data record after 30 minutes of operation), based on the following conditions:
1,500 ppm NaCl solution
150 psi (10.3 bar) operating pressure
25°C (77°F) operating temperature
15% permeate recovery
7.5-8 pH range
*Permeate flow for individual elements may vary but will be no more than ±15%.
**Stabilized salt rejection is generally achieved within 24-48 hours of continuous use; depending on feed water characteristics and operating conditions.
1,500 ppm NaCl solution
150 psi (10.3 bar) operating pressure
25°C (77°F) operating temperature
15% permeate recovery
7.5-8 pH range
*Permeate flow for individual elements may vary but will be no more than ±15%.
**Stabilized salt rejection is generally achieved within 24-48 hours of continuous use; depending on feed water characteristics and operating conditions.
Element Dimensions
|
Size |
Length L inch (mm) |
Diameter D inch (mm) |
Permeate tube inner diameter d inch (mm) |
Permeate tube Extension L1 inch (mm) |
|
8040* |
40 (1,016) |
7.9 (201) |
1.125 (28.6) |
/ |
All 8040 seawater membrane elements fit nominal 8.0 inch (203.2 mm) I.D. pressure vessels.
Operating and Cleaning Limits
|
Maximum Operating Pressure |
600 psi (41 bar) |
|
Maximum Operating Temperature |
45°C (113°F) |
|
Maximum Chlorine Concentration |
0.1 ppm |
|
pH Range, Continuous |
2 - 11 |
|
pH Range, Cleaning |
1 - 13 |
|
Maximum Feed SDI (15 mins) |
5 |
|
Maximum Element Pressure Drop |
15 psi (1 bar) |
|
Maximum Feed Flow |
17 m3/h |
The limits shown above are for general applications. For specific projects, operating at more conservative values may ensure the best performance and longest life of the membrane element.
